SciCan STATCLAVE G4 - Page 68

68
1.
2.
3. 4.
5.
6.
STAGE 3. Adjusting the atmospheric pressure
12. When you press the Calibration button to start the calibration cycle, the following screen will appear.
IMPORTANT! When this screen appears, the POA field will be highlighted and you will have 30 seconds
to complete the POA calibration before the cycle continues to the vacuum phase.
Enter
7919
and
press EN
icon
Press
Calibration
once to lock
the door.
Press
Calibration
again to
START.