Segway SNARLER ATV 2021 Series - Automatic Compression Release Installation; Automatic Compression Release Removal; Camshaft Sprocket Inspection; Camshaft Sprocket Installation

ENGINE TOP END
ENGINE TOP END
3-5-19
Inspect
Sprocket Teeth
Replace
if Worn or Damaged
C
C
D
D
E
E
A
A
Camshaft Sprocket Inspection
Camshaft Sprocket Inspection
◆
Inspect cam sprocket teeth for wear or damage.
Replace timing chain and sprockets if worn or
damaged.
Camshaft Sprocket Installation
Camshaft Sprocket Installation
◆
Install the sprockets on the intake and exhaust
camshafts.
◆
Fix the hexagonal surface
【
A
】
of the Camshaft with
tools, and tighten the sprocket bolts.
◆
Apply a non-permanent locking agent to the bolts.
Torque
Sprocket bolts
19 N
•
m (1.9 kgf
•
m, 14 ft
•
lb)
Automatic Compression Release Removal
Automatic Compression Release Removal
◆
Remove:
Camshaft (see Camshaft Removal)
Circlip
【
C
】
Automatic Compression Release Unit
【
D
】
Dowel Pin
【
E
】
Automatic Compression Release Installation
Automatic Compression Release Installation
◆
Install:
Dowel Pin
【
E
】
Automatic Compression Release Unit
【
D
】
Circlip
【
C
】