COOLING SYSTEM
6 - 9
!
◆ The start and stop of the radiator fan are controlled
by the vehicle ECU. When the water temperature
of the engine cylinder head reaches 88°C, the fan
automatically starts; until the water temperature of
the cylinder head drops below 83°C, the radiator
fan automatically stops. Do not touch the radiator
fan when it is rotating, as this may cause injury.
◆ When disassembling the radiator, it must be done
in a low temperature vehicle and in a flameout
state.
Disassembly
【A】Horn mounting bolt
【B】Radiator overfl ow pipe clamp
【C】Hose clamp for front section of radiator
【D】Radiator mounting bolt M6×25
【E】Radiator
◆ Remove the front plastic part of the vehicle(See the
vehicle body section for details)
◆ Remove the speaker mounting bolt 【A】, and
remove the speaker
◆ Use tools to remove the radiator overflow pipe
clamp, pull out the overfl ow pipe radiator front hose
clamp, and remove the left and right 2 radiator front
hose
◆ Remove the 2 radiator mounting bolts
◆ Remove the radiator
!
Do not touch the radiator core. This may damage the
heat sink, resulting in reduced cooling effi ciency
A
B
C
Radiator removal
D
E
To Next Page
Loading...
