ELECTRICAL SYSTEM
14 - 42
EPS-brushless
!
The method of disassembling the EPS assembly refers
to the method of disassembling the steering assembly.
Only the electrical functions of the EPS are introduced
here.
Before disassembling the EPS assembly【A】, firstly
remove the power connector
【
B
】
and power connector
【C】
The interface of the plug【B】is defi ned as follows
◆
G means green wire, wire diameter 5.0, for
grounding
◆ RW means red white wire, wire diameter 5.0, 12V+
The interface of the plug
【
C
】
is defi ned as follows
◆ G means green wire, the wire diameter is 0.5, CANL
◆ Y means yellow wire, wire diameter 0.5, CANH
◆
OV means orange-purple wire, wire diameter 0.5,
12V+ for key power
◆ G means green wire, wire diameter 0.5, for
grounding
A
B
C
B
C
To Next Page
Loading...
