CRANKSHAFT / TRANSMISSION
CRANKSHAFT / TRANSMISSION
3-2-33
◆
Check the needle bearings.
The rollers in a needle bearing normally wear very little,
and wear is difficult to measure. Instead of measuring,
inspect the bearing for abrasion, color change, or other
damage.Spin
【
A
】
the bearing by hand to check its
condition.
If there is any doubt as to the condition of a needle
bearing, replace it.
Oil Seal Inspection
◆
Inspect the oil seals.
Replace it if the lips are misshapen, discolored (indicating
that the rubber has deteriorated), hardened or otherwise
damaged.
To Next Page
Loading...
