FRONT & REAR SUSPENSION
9 - 14
Rocker arm maintenance
【A】Straight type grease cup
◆ Fill grease into the straight type cup with grease gun
◆ When it is found that the grease in the suspension
rocker arm shaft sleeve ,axle support and axle
sleeve is reducing, or after the vehicle runs every
1000km, grease the straight type oil cup in the
suspension system(Including upper and lower rocker
arm, rear axle support and rear stabilizer bar) with
an grease gun.
Dedicated tool：Grease gun.
!
When there is no proper lubrication for the suspension
joints, it needs to be fi lled with grease and maintained
regularly to avoid excessive wear of shaft sleeve.
A
A
To Next Page
Loading...
