FUEL SYSTEM
5 - 5
!
◆ If the resistance reading is unstable, clean the
resistance scraper with alcohol and retest. If it is
still incorrect, replace the fuel pump.
◆ If the fuel pump supply pressure test does not meet
the required value, then replace the pump.
Assembly
◆ Confi rm that the sealing ring is installed on the fuel
tank.
◆ Confirm the orientation of the fuel pump with the
cable plug connector facing the left-side of the fuel
tank as shown in the illustration.
◆ Tighten the screw cap of the fuel pump clockwise
Fuel pump Assembly screw cap
75N·m
If the fuel pump is not installed correctly, there maybe
interference with the fuel level fl oat.
To Next Page
Loading...
