VEHICLE BODY AND FRAME
13 - 28
◆ Use suitable tools to remove the bolts 2 and 5, then
remove the bolts 3 and 4, and remove the front
bumper welding assembly;
!
When removing parts 3 and 4, please gently support
the front bumper welding assembly with a suitable
assembly, so as not to fall when the last bolt is removed
and hurt yourself or others;
◆ Use a suitable tool to remove the 4 bolts 【J】 and
the spring washers and flat washers, and remove
the winch motor;
◆ Remove bolt 1 with a suitable tool, and remove the
winch mounting plate assembly;
Assembly
◆ When assembling, please reverse assembling in the
order of disassembly;
Rear armrest assembly repair
Disassembly
◆ Remove bolt 7 with a suitable tool and take out bolt 6;
◆
Pull out the rear armrest assembly backwards;
Assembly
◆ When assembling, please reverse assembling in the
order of disassembly;
J
To Next Page
Loading...
