Segway SNARLER ATV 2021 Series - Driven Pulley Inspection

CVT SYSTEM
CVT SYSTEM
3-6-18
Driven Pulley Inspection
Driven Pulley Inspection
If the sheave surfaces
【
A
】
appear damaged,
replace the sheaves.
◆
Replace the sheave with uneven wear on the belt
contacting surfaces.
Sheave Surface
【
B
】
Straight Edge
【
C
】
If the sheave bushings
【
D
】
are damaged or
worn, replace the movable sheave or fixed
sheave.
Bushing 35×39×18 inside Diameter:
【
D
】
Standard: 35.003 ~ 35.073 mm (1.378" ~ 1.381")
Service Limit: 35.11 mm (1.382")
◆
Check the Spring Free Length:
If the spring is damaged or worn, replace the spring.
Spring Free Length :
【
E
】
Standard: 139 mm ( 5.472" )
If the spring coils are distorted, replace the spring.
D
D
E
E
D
D
D
D
A
A
B
B
C
C