Segway SNARLER ATV 2021 Series

To Next Page

To Previous Page

VEHICLE BODY AND FRAME

13 - 16

Disassembly

◆ Remove the middle ﬂ oor; (see the body section for

details)

◆ Remove the outer and middle plastic parts; (see the

body section for details)

◆ Pull out the connectors or cables on the engine, and

disconnect the cables from the main cables;

◆ Use a suitable tool to remove the CVT air inlet pipe

mounting bolt 【B】;

◆ Use a flat screwdriver to remove the hoop【A】,

and remove the CVT air inlet pipe

After removing the CVT air inlet pipe, please protect the

CVT air inlet to Avoid debris from falling into the engine,

thereby damaging the engine.

◆ Use a flat screwdriver to remove the hoop 【C】,

and remove the CVT outlet pipe;

After removing the CVT air outlet pipe, please protect

the CVT air outlet toAvoid dust from falling into the

engine, thereby damaging the engine.

◆ Use a flat screwdriver to remove the bracket

【D】, disconnect the throttle valve and the

engineConnection of trachea;

After removing the throttle valve, please protect the

engine inlet to avoid dust falling into the engine; After

removing the throttle, please protect the throttle to avoid

damage to the throttle.

Segway SNARLER ATV 2021 Series - Disassembly