VEHICLE BODY AND FRAME
13 - 17
E
◆ Use a suitable tool to remove the fuel injector
mounting bolt 【E】, and remove the fuel injector
!
After removing the injector, please protect the injection
hole of the fuel injector; After removing the fuel injector,
please protect the engine fuel injector mounting hole to
prevent dust falling into the engine.
Injector mounting bolt torque torque
10N·m（1.0kgf·m，7.4ft·lb）
◆ Use a suitable tool to remove the exhaust muffler
mounting nut 【F】, and remove Exhaust muffl er;
Exhaust muffl er mounting nut torque
35～45N
·
m（3.5~4.5kgf·m，25.8~33.2ft·lb）
◆ Use a suitable tool to remove the shift rocker arm
mounting bolt【G】, and remove the shift arm
Shift arm mounting bolt torque
8N·m～12N·m（3.5~4.5kgf·m，69~103.6 in·lb）
◆ Use a suitable tool to remove the 4 mounting screws
of the front drive shaft and the engine 【H】,
disconnect the front drive shaft from the engine;
Front drive shaft mounting screw torque
45N·m（4.5kgf·m，33.2ft·lb）
When assembling, please apply appropriate amount
of thread glue on the front drive shaft mounting
screws
F
G
H
To Next Page
Loading...
