Segway SNARLER ATV 2021 Series - Drive Pulley and Driven Pulley Procedures

CVT SYSTEM
CVT SYSTEM
3-6-11
Drive Pulley and Driven Pulley Removal
Drive Pulley and Driven Pulley Removal
◆
Remove:
Torque CVT Cover (see Torque Converter Cover
Removal)
◆
Loosen the drive pulley bolt
【
E
】
(left-hand threads)
NOTE
NOTE
The drive pulley bolt has left-hand threads. Turn the
wrench clockwise for loosening.
◆
Loosen the driven pulley bolt
【
D
】
(right-hand
threads)
◆
Remove:
Drive Pulley Bolt M12×1.25×142-LH
【
E
】
Spacer 12×28×6
【
F
】
Driven Pulley Bolt M10×1.25×80
【
D
】
Spacer 10.5×36×8
【
C
】
◆
Remove the drive pulley
【
A
】
from the crankshaft
by screwing the drive pulley puller bolt
【
H
】
clockwise, while holding the drive pulley with the
drive pulley holder
【
J
】
.
◆
Screwing the Driven Pulley Separate Bolt
【
E
】
to
separate the Belt
【
G
】
from Driven Pulley
【
B
】
.
Special Tool -
Drive Pulley Puller Bolt: E01GZ0000008
Belt Separate Bolt: E01GZ0000013
Drive Pulley Holder: E01GZ0000012
◆
Remove the drive pulley, driven pulley and Drive
Belt together.
G
G
A
A
F
F
E
E
D
D
C
C
B
B
H
H
A
A
B
B
E
E
J
J
G
G
Drive Pulley and Driven Pulley