VEHICLE BODY AND FRAME
13 - 23
Rear Diff erential repair
Disassemble
◆ Unplug or remove the connectors on the rear
Differential assembly, and disconnect the main
cables.
◆ Remove the connection between the brake assembly
and the rear Diff erential assembly;
◆ Remove the connection between the left and right
constant velocity drive shafts and the rear Diff erential
assembly;
◆ Use suitable tools to remove the hoop 【C】, and
remove the rear Diff erential vent pipe;
◆ Remove the bolt 8 with a suitable tool and remove
rear Diff erential heat shield
◆ Use a suitable tool to remove the nut 11 and pull out
the bolt 9;
◆ Remove the bolt 13 with a suitable tool;
◆ Remove the nut 10 with a suitable tool, and pull out
the bolt 12;
◆ Remove the welding assembly of the trailer bracket;
◆ Use a suitable tool to remove the nut piece 7, and
pull out the bolt piece 5. Removal Diff erential left and
right bushings;
◆ Remove the bolt 6 with a suitable tool;
◆ Take out the rear Diff erential assembly from front to
back;
!
Before removing the rear Differential assembly, make
sure that the wiring harnesses on the front Diff erential
assembly are completely disconnected with The frame
or main cable
Assembly
◆ When assembling, please reverse assembling in the
order of disassembly;
C
To Next Page
Loading...
