Operator control
8.1 Device interface
SENTRON PAC4200
122 System Manual, 09/2009, A5E02316180B-02
Function keys
The function keys have multiple assignments in the measured value display. F2 and
F3
are only available when the instantaneous value is displayed.
General key functions F1 F2 F3 F4
Display the instantaneous value
Display the maximum value
Display the minimum value
Display the sliding window demand
Display the maximum value of the sliding
window demand
Display the minimum value of the sliding
window demand
Display the imported energy
Display the exported energy
Reset the maximum or minimum value to the
instantaneous value
Scroll up in the selection list
Scroll down in the selection list
Go to the menu selection
Special key functions F1 F2 F3 F4
Display the displacement angle φ
Display the cosine of the displacement angle
φ
Display the graph values
Display the graph
Display the THD of the voltage between the
phase conductors
Display the THD of the voltage between the
phase and neutral conductors
Display additional information
Scroll to the left
Scroll to the right
Display the next additional information
Display the process
Display the energy consumption per tariff for
a specific period
Display the energy export per tariff for a
specific period
Display the energy export per tariff for a
specific period
See also
Operator input steps in the measured variable display (Page 128)
To Next Page
Loading...