Doc# E166703 TOC-3
Table of Contents
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
4.7.2.1: Reinstalling the MP200 Unit Using a Shorting Block
Other than the EI SB-6TC 4-21
5: Communicating with the Meter 5-1
5.1: MP200 Metering System Communication 5-1
5.1.1: RS485 / Ethernet or WiFi (Com 1) 5-2
5.1.2: RS485 Communication 5-2
5.1.2.1: Using the Unicom 2500 5-5
5.1.3: USB Port (Com 2) 5-6
5.1.4: RS485/Display Port (Com 3) 5-7
5.2: MP200 Metering System Communication and
Programming Overview 5-8
5.2.1: Connecting to the MP200 Unit through
Communicator EXT
TM
Software 5-8
5.2.1.1: Additional MP200 Unit Device Profile Settings 5-15
6: Using the MP200 Metering System’s Watt-Hour
Test Pulses 6-1
6.1: Overview 6-1
6.2: Performing Watt-Hour Accuracy Testing (Verification) 6-1
6.2.1: Examples 6-2
6.2.2: Kh Testing Procedure 6-4
7: Using the MP200 Metering System’s I/O 7-1
7.1: Overview 7-1
7.2: Digital Output (Relay Contact) / Digital Input Board 7-1
7.2.1: Wiring Diagram 7-2
8: Using Ethernet Communication (RJ45 and WiFi) 8-1
To Next Page
Loading...
