This Organizer can transmit data to and receive data from the following
products.
1. Data transfer between ZQ-2000 series Organizers (using option CE-
200L or CE-300L).
2. Data transfer with a ZQ-5000 series or IQseries Organizer (using option
CE-200L or CE-300L).
3. Data transfer with an EL series Organizer (including Auto Dialer) that
has data transfer capability (using option CE-220T).
Before establishing communication between products, turn the products
off and connect the cable.
Notes:
• To interrupt data transfer, press IC'CE I .
• If a connector is disconnected, or a similar problem occurs during data
transfer, the message "I/O DEVICE ERROR" will appear.
• After data transfer, the data on the transmitter is preserved.
Transferring data between ZQ-2000
series Organizers
Telephone directory data, schedule data, and memo data can be trans- I
ferred. Data can be transferred and verified by mode (all items in the
SCHEDULE mode, MEMO mode, or a telephone directory - TEL1, TEL2,
TEL3) or by data item. In addition, data can be backed up using Organizers
of the same type.
89
To Next Page
Loading...
