Shinko FCD-13A - Auxiliary Function Setting Mode 2 Characters; Program Mode Characters

63
PV filter time constant 0.0 sec
OUT1 high limit 100%
OUT1 low limit 0%
OUT1 ON/OFF hysteresis
1.0
OUT2 action mode Air cooling
OUT2 high limit 100%
OUT2 low limit 0%
OUT2 ON/OFF hysteresis
1.0
Alarm 3 type No alarm action
Alarm 4 type No alarm action
Alarm 1 action Energized/De-energized Energized
Alarm 2 action Energized/De-energized Energized
Alarm 3 action Energized/De-energized Energized
Alarm 4 action Energized/De-energized Energized
Alarm 1 hysteresis
1.0
Alarm 2 hysteresis
1.0
Alarm 3 hysteresis
1.0
Alarm 4 hysteresis
1.0
Alarm 1 action delay timer 0 sec
Alarm 2 action delay timer 0 sec
Alarm 3 action delay timer
0 sec
Alarm 4 action delay timer
0 sec
External setting input high limit
400
External setting input low limit
0
Transmission output PV transmission
Transmission output high limit
400
Transmission output low limit
0
Indication when control output OFF
OFF on the PV display
SV rise rate
0
/minute
SV fall rate
0
/minute
Output status when input abnormal
Outputs OFF(4mA)
or OUT1(OUT2)
low limit value.
<Program mode>
Character Item Default Data
Fixed value control/Program control
Fixed value
control
Step 1 time 00.00
Step 2 time 00.00
Step 3 time 00.00
Step 4 time 00.00
Step 5 time 00.00
Step 6 time 00.00
Step 7 time 00.00