Name: SICK C4000 Select
Brand: SICK
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Operating Instructions Chapter 5

C4000 Select

Installation and mounting

Example

Stopping/run-down time of the machine = 290 ms

esponse time after light path interruption = 30 ms

Resolution of the light curtain = 30 mm

T = 290 ms + 30 ms = 320 ms = 0.32 s

= 2000 × 0.32 + 8 × (30 – 14) = 768 mm

> 500 mm, therefore:

= 1600 × 0.32 + 8 × (30 – 14) = 640 mm (25.2 inches)

5.1.5 Minimum distance to reflective surfaces

Maintain the minimum distance from reflective surfaces!

The light beams from the sender may be deflected by reflective surfaces. This can result in

failure to identify personnel infringing on the protective device causing an operator to be at

risk. Ensure that your application adheres to the required minimum distance to reflective

surfaces.

All reflective surfaces and objects (e.g. material bins) must be a minimum distance a from

the light path between sender and receiver. The minimum distance a depends on the

distance D between sender and receiver.

The field of view of the sender and receiver optics is identical.



WARNING

Fig.

Minimum distance to

reflective surfaces

Note

Reflective surface

Field of view

Minimum distance a

Distance D sender–receiver

Questions and Answers:

Need help?

Do you have a question about the SICK C4000 Select and is the answer not in the manual?

SICK C4000 Select Specifications

General