SICK MAX Series

Welding
Welding currents may be produced when carrying out welding work on nearby compo‐
nents. Welding currents can damage the pressure pipe or the electronics.
The following must also be observed when welding:
•
Disconnect all electrical connections during welding
•
Never fasten the grounding point to the piston rod or cylinder pipe
•
Never perform welding work directly on the cylinder
•
Never perform welding work near a cylinder with an encoder installed in it
•
Welding currents and similar effects can also arise at any bearing location on the
machine
4 MOUNTING
24
O P E R A T I N G I N S T R U C T I O N S | MAX 8022793/ZXZ4/2018-07-24 | SICK
Subject to change without notice