8 Transport and storage
8.1 Transport and storage conditions
When transporting the fully assembled cylinders, ensure the cable and male connector
of the electrical connection are not subjected to tensile loads.
Store the cylinders in a dry place. When storing the cylinders on top of one another,
ensure no male connectors or cables are crushed.
Cover the connectors and any free cable ends with an anti-static bag. The original pack‐
aging, for example, is suitable for this purpose. Also reuse the dust protection caps of
the connector system when storing the device.
For the part numbers of the original packaging and the dust protection caps, see: see
"Accessories", page 51.
TRANSPORT AND STORAGE 8
8022793/ZXZ4/2018-07-24 | SICK O P E R A T I N G I N S T R U C T I O N S | MAX
41
Subject to change without notice
To Next Page
Loading...
Need help?
General
