12 Clinitek Advantus Operator’s Guide
Overview and Intended
Use
Memory
The analyzer software is stored in internal flash memory. When necessary,
you can update the software using an electronic memory card located on the
back of the interactive touch display.
The analyzer stores the operating parameters, including those selected by
the user, and up to 500 patient results and 200 quality control results. This
information is in a RAM with a battery backup, and is held in memory
regardless of whether the analyzer power is on or off.
Figure 3 Connections, Power, and Memory
1
Memory card slot
2
Cooling fan
3
Power switch
4
Line cord receptacle
5
Ethernet interface connector
6
Serial interface connector
7
Printer interface connector
8
Keyboard and barcode reader interface connector
To Next Page
Loading...
