Siemens Clinitek Advantus User Manual

74 Clinitek Advantus Operator’s Guide
System Configuration
Installing the Analyzer
Record the Warranty Information
1. Locate the serial number.
The serial number is found inside the analyzer near the front left corner.
Figure 23 Locate the Serial Number
2. Print the Pre-service Checklist‚ page 116, and the Warranty Information‚
page 113.
3. Write the installation date and serial number in the spaces provided in the
Pre-service Checklist‚ page 116, and on the Warranty Information‚
page 113.
4. Contact your Siemens Diagnostics representative for your warranty
information if this page is not included in your guide.
1
Serial number

Siemens Clinitek Advantus Specifications

General

Test Types	Urinalysis
Interface	RS-232, USB
Calibration	Automatic calibration
Measurement Principle	Reflectance photometry
Sample Type	Urine
Power Supply	100-240 VAC, 50/60 Hz
Type	Urine analyzer
Display	Touchscreen
Reagent Type	Test strips
Measurement Parameters	Glucose, Bilirubin, Ketone, Specific Gravity, Blood, pH, Protein, Urobilinogen, Nitrite, Leukocytes