114 Clinitek Advantus Operator’s Guide
Warranty and Support
Information
3. This warranty shall not cover repairs or replacement of parts necessitated
by abuse, accidents, alteration, misuse, neglect, maintenance by other
than Siemens Diagnostics, failure to operate the instrument in
accordance with instructions, or the use of reagents other than reagents
manufactured or recommended by Siemens Diagnostics.
4. Siemens Diagnostics reserves the right to make changes in design of this
instrument without obligation to incorporate such changes into previously
manufactured instruments.
Disclaimer of Warranties
This warranty is expressly made in lieu of any and all other warranties
express or implied (either in fact or by operation of law) including the
warranties of merchantability and fitness for use which are expressly
excluded, and is the only warranty given by Siemens Diagnostics.
Limitations of Liability
In no event shall Siemens Diagnostics be liable for indirect, special or
consequential damages, even if Siemens Diagnostics has been advised of
the possibility of such damages.
For warranty service, contact the local Siemens Diagnostics office for
assistance and/ or instructions for obtaining repair/ replacement of this
instrument.
Support Information
Call for assistance:
• if the error message continues to be displayed after performing the steps
described on the screen and in the Troubleshooting Chart
• if additional assistance is required concerning an analyzer problem
• if the problem is beyond the scope of this guide
• if the problem cannot be solved and an analyzer failure is apparent
Our local technical support providers are available to help you. Before calling,
please complete the Pre-service Checklist‚ page 116. Make a photocopy of
the checklist first. This information helps your local technical support provider
to identify the probable cause of the problem.
To Next Page
Loading...
Need help?
General
