28 Clinitek Advantus Operator’s Guide
Operating the System
Printing and Transmitting Results
Printing Records from Memory
1. Recall a group of results. Refer to Recalling Results‚ page 27.
2. Select
Print to print 1 or more records.
3. Select 1 of the following options:
After printing is complete, the screen returns to the earliest record of the
group. If Print a group of results is selected, the display first returns to the
screen from which the group was selected.
4. Select
Previous Screen as needed to return to the first record.
Resending Records from Memory
Use this procedure to resend 1 or more records to a host computer or LIS:
1. Recall a group of results. Refer to Recalling Results‚ page 27.
2. Select Resend.
To... Select...
Print the record displayed,
Print only this result
The SEQ # and ID of that record continues to
display on the print option menu.
Specify the beginning and
ending records to print,
Print a group of results
1. Use the movement keys to specify the start
record to print.
2. Select
Enter to select the end record to print.
This record must have a SEQ # that is higher
than or the same as the start record.
3. Select Enter to begin printing.
All records in the sequential group print.
NOTE: The results tested using a loadlist may
include STAT tests carried out during the loadlist
testing.
Print all records that were
recalled,
Print all patient (control) results
To Next Page
Loading...
Need help?
General
