Siemens Clinitek Advantus User Manual

Clinitek Advantus Operator’s Guide 7
Using this Guide
The Clinitek Advantus Operator’s Guide provides information for clinical
laboratory professionals who use the Clinitek Advantus system:
The following table describes how this guide is organized.
If you want to . . . Then refer to . . .
learn about the system principles,
the hardware, and the operating
sequence
Section 1, Overview and Intended Use
process samples and manage
sample results
Section 2, Operating the System
learn about calibration and how to
print the calibration status
Section 3, Calibration
process QC samples Section 4, Quality Control
perform maintenance activities Section 5, Maintenance
investigate and correct system
problems
Section 6, Troubleshooting
learn about file and data
management
Section 7, File Management
install the system or modify system
parameters
Section 8, System Configuration
review additional information such
as the glossary or the supplies list
Appendices

Siemens Clinitek Advantus Specifications

General

Test Types	Urinalysis
Interface	RS-232, USB
Calibration	Automatic calibration
Measurement Principle	Reflectance photometry
Sample Type	Urine
Power Supply	100-240 VAC, 50/60 Hz
Type	Urine analyzer
Display	Touchscreen
Reagent Type	Test strips
Measurement Parameters	Glucose, Bilirubin, Ketone, Specific Gravity, Blood, pH, Protein, Urobilinogen, Nitrite, Leukocytes