Siemens Clinitek Advantus User Manual

54 Clinitek Advantus Operator’s Guide
Maintenance
Calibrating the Touch Screen
Calibrate the touch screen if it does not respond correctly when a key is
touched.
1. Turn analyzer power off.
2. Wait several seconds.
3. Turn analyzer power on.
4. When the title screen displays, touch the screen anywhere.
The display prompts Touch the top left corner and an X displays in the
corner.
5. Touch the screen at the center of the
X.
6. Repeat when the prompt changes to Touch the bottom right corner.
When the touch screen is calibrated, the display automatically continues
in the normal sequence of screens.

Siemens Clinitek Advantus Specifications

General

Test Types	Urinalysis
Interface	RS-232, USB
Calibration	Automatic calibration
Measurement Principle	Reflectance photometry
Sample Type	Urine
Power Supply	100-240 VAC, 50/60 Hz
Type	Urine analyzer
Display	Touchscreen
Reagent Type	Test strips
Measurement Parameters	Glucose, Bilirubin, Ketone, Specific Gravity, Blood, pH, Protein, Urobilinogen, Nitrite, Leukocytes