Siemens COMOS User Manual

8.8.4 Updating attachment type combinations
The combinations that you have predefined yourself update automatically.
If you have subsequently added or removed a pipe part from the "Pipe parts" tab, update the
standard
combinations of the fastening tables manually. COMOS recognizes inconsistencies
and corrects these.
Procedure
Click the "Update" button.
8.8.5 Evaluation sequence
The "Fastening table" tab is evaluated if two pipe parts belonging to the same pipe spec are
interconnected in the engineering data.
Procedure
1. For both pipe parts, COMOS checks which attachment types have been set on the
"Connector <1-n>" tab.
2. The attachment types are determined.
3. The fastening part is determined for the combinations of both attachment types with the aid
of the fastening table.
4. The fastening part is used.
5. Steps 1-4 are executed recursively at every selected fastening part used.
8.8.6 Adding standard combinations
The standard combinations of attachment types are stored in the following object in the "Default
attachment connections" table:
"@20 > C90 > A50 > A10 Attachment type combinations"
● The following standard table is available in the "First attachment type" column and "Second
attachment type" column:
"Standard tables > Y10 > M23 > A20 > Y10M23N00030 Attachment types"
● The following standard table is available in the "Function code group" column:
"Standard tables > Y10 > M23 > A20 > Y10M23N00031 Function code groups"
If you have expanded the standard table, enter the new combinations in the "Attachment type
combinations" object.
Configuring pipe specs
8.8 "Fastening table" tab
PipeSpec Designer
Operating Manual, 09/2014, A5E32076948-AA 107

Siemens COMOS Specifications

General

Manufacturer	Siemens
Description	COMOS is plant engineering software for the process industry. It manages plant projects and documentation. It covers the entire plant lifecycle from engineering and design to operation and maintenance.
Functionality	Plant design and engineering
Integration	Integrates with Siemens TIA Portal, SIMATIC PCS 7, and other third-party systems
Data Management	Centralized data management
Modules	Includes modules for process engineering, electrical engineering, instrumentation, and automation
Collaboration	Supports multi-disciplinary team collaboration with role-based access
Documentation	Automated generation of documentation (e.g., P&IDs, loop diagrams, instrument lists), document management, version control.
Customization	Highly customizable to meet specific project requirements and industry standards. Allows for scripting and API integration.
Industry Standards	ISO, IEC