1 x nut Mxx
Optional: 1 x washer
Mixed bolt types
The following mixed bolt types are available:
●
Clamp and blind hole bolted connection
● Normal and blind hole bolted connection
Clamp bolted connection
Clamp bolted connections are used with clamping parts (adapter flange parts or wafer types),
e.g. long hexagon bolts with a nut.
Example: DIN 2510
Screw bolt Mxx
2 x nuts Mxx
Optional: 2 x washers
13.2
Algorithm for calculating the screw length
The bolted connection type set at the flange at the following attribute determines which
algorithm COMOS uses to calculate the bolt lengths:
"Attributes > Connector <Counter>" tab, "Bolted connection type" field
Database reference
13.2 Algorithm for calculating the screw length
PipeSpec Designer
146 Operating Manual, 09/2014, A5E32076948-AA
To Next Page
Loading...
