Siemens COMOS User Manual

Procedure
1.
Select a fluid group.
2. Save your entries.
8.3.3 Defining other characteristics of the pipe spec
Requirement
● Observing the workflow for configuration of pipe specs. See also chapter Overview for
configuring pipe specs (Page 79).
● You have opened the "Characteristics" tab.
● You are working in the "Class characteristics" and "Connector descriptions" control groups.
Procedure
1. Select a material in the "Pipe material" field.
The corresponding material number is automatically transferred to the "Material number"
attribute.
2. Enter the material density in the "Material density" field. The material density can be used
for further calculations.
3. Select the primary contact face in the "Contact face" field.
4. Select the strength grade of screws in the "Strength grade screws" field and the strength
grade of nuts in the "Strength grade nuts" field.
5. Save your entries.
8.3.4 Defining nominal-diameter-dependent parameters
In the "Classes characteristics nominal-diameter-dependent" control group define the nominal-
diameter-dependent characteristics in a table.
The table is used for pipe spec documentation.
Exception: You enter pipe-spec-dependent outer diameters and wall thicknesses in a table
and a pipe spec element is assigned its outer diameter and wall thickness via the calculation
Configuring pipe specs
8.3 Configuring the "Characteristics" tab
PipeSpec Designer
Operating Manual, 09/2014, A5E32076948-AA 85

Siemens COMOS Specifications

General

Manufacturer	Siemens
Description	COMOS is plant engineering software for the process industry. It manages plant projects and documentation. It covers the entire plant lifecycle from engineering and design to operation and maintenance.
Functionality	Plant design and engineering
Integration	Integrates with Siemens TIA Portal, SIMATIC PCS 7, and other third-party systems
Data Management	Centralized data management
Modules	Includes modules for process engineering, electrical engineering, instrumentation, and automation
Collaboration	Supports multi-disciplinary team collaboration with role-based access
Documentation	Automated generation of documentation (e.g., P&IDs, loop diagrams, instrument lists), document management, version control.
Customization	Highly customizable to meet specific project requirements and industry standards. Allows for scripting and API integration.
Industry Standards	ISO, IEC