Siemens FLENDER K SH Series - EC Declaration of Conformity

108 / 109
BA 5846 en 05/2015
12.2 EC declaration of conformity
EC declaration of conformity
within the meaning of EC Directive 94/9/EC of 23.03.1994 and the legal requirements laid down for its
implementation
The manufacturer, Siemens AG, 46395 Bocholt, Germany, declares that the equipment described in these
assembly and operating instructions:
Crane gear unit
K.SH, K.SM, K.VH, K.HH, K.KH,
K.DH, K.HM, K.KM, K.DM
Sizes 15 to 24
and sizes 115 to 124
is in conformity with Article 1 and Article 8, Paragraph 1 b) ii) or 1 c) of Directive 94/9/EC and complies
with the requirements of Directive 94/9/EC and the following standards:
DIN EN 1127‐1 : 10‐2011
DIN EN 13463‐1 : 07‐2009
DIN EN 13463‐5 : 10‐2011
DIN EN 13463‐6 : 07‐2005
DIN EN 13463‐8 : 01‐2004
DIN EN 60079-0 : 06‐2014
The technical documentation has been delivered to the body named below:
DEKRA EXAM GmbH, 44727 Bochum, Germany, code number: 0158.
Voerde, 2015‐05‐18
Mark Zundel
(PD MD AP EMEA VOE OE)
Voerde, 2015‐05‐18
Dr. Bernhard Hoffmann
(PD MD AP)