Siemens FLENDER K SH Series - Initial Gear Unit Start-up

77 / 109
BA 5846 en 05/2015
Table 14: Approximate values for required oil quantities in mounting position in gear units for
sizes 115 to 124
Type
Oil quantity (approximate value)
in litres for sizes 115 to 124
115 116 117 118 119 120 121 122 123 124
K3SH, K3SM, K3VH, K3HH ,K3KH, K3DH
150 175 210 240 285 360 410 520
1) 1)
K3HM, K3KM, K3DM
150 175 210 240 285 360 410 520
1) 1)
K4SH, K4SM, K4VH, K4HH ,K4KH, K4DH
165 200 245 285 320 420 465 540
1) 1)
K4HM, K4KM, K4DM
165 200 245 285 320 420 465 540
1) 1)
1)
on request
7.2 Startup
NOTICE
Material damage
Risk of destruction of the gear unit or gearunit components through incorrect direction of rotation.
The gear unit can only be operated in one direction of rotation.
It is possible that a certain direction of rotation has been specified in the order which is realised by
addingon a backstop.
NOTICE
Material damage
Risk of damage to the gear unit through missing or insufficient ventilation.
Replace the screw plug with the air filter or wetair filter before startup.
NOTICE
Material damage
Risk of damage to the wetair filter.
Observe the instructions relating to the wetair filter.
• Check the oil level of the gear unit (see item 7.2.1).
• After the initial startup of an external oilsupply system the oil level in the gear unit must be checked
(see item 7.2.1).