Siemens FLENDER K SH Series - Taconite Seal

30 / 109
BA 5846 en 05/2015
5.6.2 Taconite seal
Taconite seals have been especially developed for use in a dusty environment. The entry of dust is
prevented by the combination of three sealing elements (radial shaftsealing ring, lamellar seal and
a greasecharged, rechargeable labyrinth seal).
1
2
3
4
Fig. 11: Taconite seal
1 Radial shaft-sealing ring
2 Lamellar seal
3 Grease-charged labyrinth seal, re-chargeable
4 Flat grease nipple AM10x1
to standard "DIN 3404"
The following types of Taconite seals are distinguished:
Taconite "E" Taconite "F"
1
2
3
1
4
Taconite "F‐F" and "F‐H" Taconite "F‐K"
Fig. 12: Taconite seal, variants E, F, FF, FH and FK
1 Output
2 Taconite "F‐F"
3 Taconite "F‐H"
4 Taconite "F‐K"