64 / 109
BA 5846 en 05/2015
5
4
6
3
1
2
7
Fig. 35: Hollow shaft in design with shrink disk, demounting with hydraulic lifting unit
1 Machine shaft
2 Hollow shaft
3 DU bush
4 Hydraulic lifting unit
5 Threaded spindle
6 Pressure-oil connection
7 Auxiliary plate for forcing out
5
6
4
3
1
2
Fig. 36: Hollow shaft in design with shrink disk, demounting with end plate
1 Machine shaft
2 Hollow shaft
3 DU bush
4 End plate
5 Pressure-oil connection
6 Forcing-off screws
NOTICE
Material damage
Damage to the gear unit possible through canting during demounting work.
When pulling the gear unit off the drivenmachine shaft any canting must be avoided.
To Next Page
Loading...
