Siemens RM400 C Series - The floppy disk drive

116 RM400 C Models U24802-J-Z146-2-7600
10 Drives
10.2 The floppy disk drive
Figure 46: Floppy disk drive
You must not press the release button (2) on the floppy disk drive while
the access LED (1) is lit.
Inserting a floppy disk
Ê Hold the disk with the metal shutter facing the drive and the round plate in the
middle of the disk facing downwards.
Ê Push the disk right into the drive until it clicks into place and the release button
pops out.
Removing a floppy disk
You must not remove a floppy disk while the floppy disk drive access LED
is lit.
Ê Press the release button.
The floppy disk will now slide part of the way out of the drive slot, and you can pull it
all the way out of the drive.
(1) Access LED
(2) Release button
2
1
!
!