30 RM400 C Models U24802-J-Z146-2-7600
4
Installing the system unit
4.4 The system unit control panel
Figure 6: System unit control panel
(1) [ON/OFF]
[ON/OFF] switches the system unit on and off. [ON/OFF] can only be
operated if the keylock switch is in the LOCAL position.
You must switch on the monitor before switching on the system unit.
Never press [ON/OFF] if the operating system is active and the
keylock switch is set to LOCAL. This may cause data to be lost.
(2)POWER
This LED lights up green when the system unit is on (also applies to BBU
operation).
POWER DISK RESETON/OFF
LOCK
L
O
C
A
L
4
R
E
M
O
T
E
2 3 5
1
!
To Next Page
Loading...
