144 RM400 C Models U24802-J-Z146-2-7600
12
Equipment care
Ê Issue the command clean8mm devicename at shell level.
This starts the cleaning operation. The operation takes approx. 1-2 minutes. Once
the cleaning operation is complete, the cleaning cartridge is ejected automatically.
Ê Remove the cleaning cartridge.
Ê Note the date on the label provided.
This completes the cleaning operation.
12.2 Cleaning SCSI devices
For instructions on caring for other additional SCSI devices refer to the operating
manuals accompanying the devices.
12.3 Cleaning printers
As printers feature a complex mechanism and large amounts of dust can settle in
the interior during printing, it is essential to clean them regularly. For cleaning
instructions refer to your printer’s operating manual.
To Next Page
Loading...
Need help?
General
