170 RM400 C Models U24802-J-Z146-2-7600
14
Equipment settings
14.2 Drive names
This section lists the drive-specific device names (special files) with which the drives
can be addressed. If you wish to execute a write or read command for a data
medium, you must specify the device name of the drive containing the data medium.
Access to the drives can be defined by means of options. These options and their
meanings are explained, as is the way to determine the device names.
Options (in square brackets) for special file names
Device name
(autoconf output)
Type Special file name
fd01 Floppy disk drive /dev/at/flp/rf[0t|x3ht|x3dt]
HP 88780
1
/
2
inch MT, 160 Mbyte /dev/ios0/rstapeXXY[h][n][o]
MC23 4 mm MTC
(DAT, 4 Gbytes)
/dev/ios0/rstapeXXY[h][n][o][c]
MC41 4 mm MTC jukebox
(DAT, 6 x 4 Gbytes)
/dev/ios0/rstapeXXY[h][n][o][c]
MC43 4 mm MTC
(DAT, 2.0 Gbytes)
/dev/ios0/rstapeXXY[h][n][o]
MC10 8 mm MTC
(5 Gbytes and data com-
pression)
/dev/ios0/rstapeXXY[c][h][n][o]
MC75 8 mm MTC
(20 Gbytes and data
compression)
/dev/ios0/rstapeXXY[c][h][n][o]
MC12 1/4 inch MTC 525
Mbytes
/dev/ios0/rstapeXXY[h][n][o][v]
OS26 (CD-ROM) CD-ROM (650 Mbyte) /dev/ios0/sdiskXXYs0
OS28 (CD-ROM) CD-ROM (650 Mbytes) /dev/ios0/sdiskXXYs0
c Data compression
h High density
n No rewind
o No rewind, leave in block
To Next Page
Loading...
Need help?
General
