124 RM400 C Models U24802-J-Z146-2-7600
10
Drives
10.6 The 8 mm, 20/40 Gbyte cartrigde tape drive
The 8 mm, 20/40 Gbyte MTC drive has the following controls:
Figure 53: 8 mm, 20/40 Gbyte MTC drive controls
(1) = amber LED (error indicator)
(2) = green LED (standby indicator)
(3) = green LED (tape motion indicator)
(4) = Release button
Please note the following:
Only use EXATAPE-approved 8 mm magenetic tape cartridges. Other
cartridges can cause problems. Information on approved 8 mm cartrid-
ges is provided in this manual in the chapter “Accessories” on page 175.
● The error indicator (1) (amber LED) lights up when the system is powered up
and is extinguished once the self-test has been passed successfully. It only
flashes if the MTC drive has a fault. It is illuminated if the MTC drive requires
cleaning.
2
3
1
4
!
To Next Page
Loading...
