Preface
1
U24802-J-Z146-2-7600 RM400 C Models 5
Dokuschablonen Version 3.2 vom 25.10.93 © Siemens Nixdorf Informationssysteme AG 1993
Druck vom 12. 04.1999 16:16.52 Pfad: H:\Christoph\Manuale\PDF\RM\RM400C Betriebsanleitung\englisch\rm400.k01
1.3 Summary of contents
● Important notes
Provides essential information relating to the safe and reliable operation of
your system.
● Unpacking your system
Tells you which components should have been delivered with your system.
● Installing the system unit
Tells you how to set up the system unit, connect it to the monitor, the keyboard
and the mouse, and start it up.
● Installing peripherals
Tells you how to connect printers, modems and SCSI peripherals to the system
unit, how to connect the system unit to a local area network (LAN) and an
uninterruptible power supply (UPS), and how to start up the peripherals.
● Online replacement (OLR)
Tells you how to identify and replace defective hard disk drives and how to
check the configuration of new drives. The chapter begins by describing the
conditions under which online replacement is possible.
● Software
Tells you how to activate Reliant UNIX or SINIX V5.42 on your machine.
● Troubleshooting
Tells you how to identify minor problems and how you can eliminate some of
them yourself.
● Moving your system
Tells you how to go about moving your system to another location.
● Drives
Tells you how to operate the various drives on your system.
● Data media
Tells you how to handle the various data storage media.
● Equipment care
Tells you what cleaning and maintenances duties you need to perform and how
often you need to perform them.
To Next Page
Loading...
Need help?
General
