Technical data
13
U24802-J-Z146-2-7600 RM400 C Models 149
Dokuschablonen Version 3.2 vom 25.10.93 © Siemens Nixdorf Informationssysteme AG 1993
Druck vom 12. 04.1999 16:17.36 Pfad: H:\Christoph\Manuale\PDF\RM\RM400C Betriebsanleitung\englisch\rm400.k13
13.3 Expansion options
We are constantly enhancing our systems to keep pace with the demands of the
market. You can find out what enhancements have been made since you bought
your system by consulting your local SNI office, and you can at any time have these
components added to your system by our service organization.
Any system upgrades which involve opening the system unit case must
be performed by SNI service personnel. The same applies to the
connecting of peripherals cabinets.
Note that not all combinations of expansion options are possible. If you need details
of suitable combinations, you should consult your local SNI office.
13.3.1 Expanding the processor board
The following expansion options are available:
Model Expansion option
C60 Processor board (200 MHz CPU, 1 Mbyte SLC)
C62 Processor board (200 MHz CPU, 1 MB SLC) or
Processor board (2 x 200 MHz CPU, 2 x 1 MB SLC)
C70 Processor board (200 MHz CPU, 4 MB SLC) or
Processor board (2 x 200 MHz CPU, 2 x 4 MB SLC)
C72 Processor board (200 MHz CPU, 4 MB SLC) or
Processor board (2 x 200 MHz CPU, 2 x 4 MB SLC)
C80 1 - 3 Processor boards (180 MHz CPU, 2 MB SLC)
C90 1 - 3 Processor boards (200 MHz CPU, 4 MB SLC)
i
To Next Page
Loading...
Need help?
General
