120 RM400 C Models U24802-J-Z146-2-7600
10
Drives
Figure 50: Inserting and removing a 4 mm cartridge
Inserting a 4 mm cartridge
Only use 4 mm cartridge tapes bearing the “DDS” (Digital Data Storage)
and “MRS IIII” (Media Recognition System) symbols.
Ê Make sure that the ready indicator is not lit or flashing.
Ê With the viewing window facing up, push the cartridge into the drive until the
automatic mechanism engages and pulls it all the way in.
The cartridge is now in position. The ready indicator (green LED) lights up.
Removing a 4 mm cartridge
Ê Always wait until the ready indicator (green LED) is steady (not flashing).
Ê Press the release button to eject the cartridge and then pull the cartridge out
of the slot.
4 mm cartridges should only be left in the drive for as long as is absolutely
necessary. Keep cartridges in their original packaging, as this is the best
way to protect them against dust.
i
i
To Next Page
Loading...
Need help?
General
