Siemens RM400 C Series - Default settings for screens and printers

Technical data 13
U24802-J-Z146-2-7600 RM400 C Models 151
Dokuschablonen Version 3.2 vom 25.10.93 © Siemens Nixdorf Informationssysteme AG 1993
Druck vom 12. 04.1999 16:17.36 Pfad: H:\Christoph\Manuale\PDF\RM\RM400C Betriebsanleitung\englisch\rm400.k13
Diagnostic bus controller
Peripherals controller (SCSI controller)
Terminal controller
CM01 Intelligent diagnostic
bus controller (IDC)
ISA
CS11
CS13
SCSI EISA differential
CS18 SCSI host adapter PCI differential, 1 or 3 channels
CS19 SCSI host adapter PCI single ended
CS20 SCSI host adapter PCI differential, 1 channel
CS31 RAID SCSI PCI single ended, 1 or 3 channels, 10 MB/s,
8 bit
CS35 RAID SCSI PCI single ended, 1 or 3 channels,
40 MB/s,16 bit
CT21 TACSI EISA EISA bus serial interface multiplexer (E-
SIM)
CT31 IHSS multipoint
(E-SIH)
EISA 4 x IHSS
CT32 IHSS multipoint
(E-SIH)
EISA 4 x V.24
CT33 IHSS multipoint
(E-SIH)
EISA 2 x IHSS, 2 x V.24
CT40 TC4P ISA with 4 x V.24, V.11, IHSS, IMD
CT45 TC4 ISA with 4 x V.24
CT50 TC32 EISA with max. 32 x V.24, V.11 or IHSS
ITC Intelligent terminal
controller
ISA with 16 x. IHSS