Siemens RM400 C Series User Manual

Equipment settings 14
U24802-J-Z146-2-7600 RM400 C Models 173
Dokuschablonen Version 3.2 vom 25.10.93 © Siemens Nixdorf Informationssysteme AG 1993
Druck vom 12. 04.1999 16:17.38 Pfad: H:\Christoph\Manuale\PDF\RM\RM400C Betriebsanleitung\englisch\rm400.k14
Addresses for SCSI devices in peripherals cabinets
Peripherals cabinets are attached to SCSI controllers installed in the optional slots
in the system unit. Both EISA and PCI controllers can be used. The addresses of
hard disks in peripherals cabinets can be listed with the autoconf command.
Configuration of peripherals cabinets is handled by the SNI service personnel.
Addresses for the floppy disk drive
The floppy disk drive in the system unit has its own controller.
Major/minor
dev. number
Capacity Device names in Reliant UNIX/
SINIX V5.42
1
1
Other additional device names have been set up for some device entries.
23/116 1440 Kbyte /dev/at/flp/[r]fx3h

Siemens RM400 C Series Specifications

General

Brand	Siemens
Model	RM400 C Series
Category	Industrial Equipment
Language	English