Siemens RM400 C Series User Manual

Important notes 2
U24802-J-Z146-2-7600 RM400 C Models 13
Dokuschablonen Version 3.2 vom 25.10.93 © Siemens Nixdorf Informationssysteme AG 1993
Druck vom 12. 04.1999 16:16.54 Pfad: H:\Christoph\Manuale\PDF\RM\RM400C Betriebsanleitung\englisch\rm400.k02
Figure 2: Parallel blade plug, tandem blade plug
For units set at 115 V:
Use a parallel blade, grounding type attachment plug rated at 15 A, 125 V (above
plug).
For units set at 230 V (domestic use):
Use a tandem blade, grounding type attachment plug rated at 15 A, 250 V (below
plug).
For units set at 230 V (outside the USA and Canada):
Use a cable set having the minimum AWG as indicated in the table above and a
grounding type attachment plug rated at 15 A, 250 V. The cable set should be
marked HAR and have the appropriate safety approvals for the country in which the
equipment is to be installed.
For the United Kingdom:
If the plug type on the flexible cable is not suitable for your power outlets, do not use
an adapter; instead, remove the plug from the cord and discard. Carefully prepare
the end of the power cable and fit it with a suitable plug.
This appliance must be earthed.
!

Siemens RM400 C Series Specifications

General

Brand	Siemens
Model	RM400 C Series
Category	Industrial Equipment
Language	English