Installing the system unit
4
U24802-J-Z146-2-7600 RM400 C Models 35
Dokuschablonen Version 3.2 vom 25.10.93 © Siemens Nixdorf Informationssysteme AG 1993
Druck vom 12. 04.1999 16:16.59 Pfad: H:\Christoph\Manuale\PDF\RM\RM400C Betriebsanleitung\englisch\rm400.k04
In emergencies you can pull out the power plug. With the RM400-C80
and C90 models you must pull out both power connectors. But this may
cause loss of data.
If the system is in BBU (battery backup unit) operation, in emergencies
you can switch it off by turning the keylock switch to LOCAL and pressing
the [ON/OFF] button. This may also cause loss of data.
!
To Next Page
Loading...
Need help?
General
