Siemens SCALANCE X-400

Configuration using Web Based Management and Command Line Interface
4.4 The Agent menu
SCALANCE X-300 / X-400
104 Configuration Manual, 10/2014, C79000-G8976-C187-22
Delete
Click on this button to delete a user.
Creating a new user
After clicking the "New Entry" button in the "SNMPv3 Users Configuration" window, the
window for creating a new user opens:
Figure 4-34 SNMPv3 Users Configuration II
User Name
Enter the name of the new user here.
Group Name
Here, you select the group to which the new user will belong.
Syntax of the Command Line Interface
Table 4- 24 SNMPv3 Users - CLI\AGENT\SNMP\USER>
Command
Description
Comment
info
Displays a list of all SNMPv3 users.
-
add <username>
<groupname>
Adds a new SNMPv3 user to a group.
If authentication is necessary for the group,
MD5 is selected as the default algorithm.
Administrator only.
auth <username><MD5|SHA> Changes the authentication algorithm (MD5
or SHA) or an SNMPv3 user.
This command can only be used for mem-
bers of a group for which this authentication
is necessary.
Administrator only.
pass
<username><authentpassword>
[encr.password]
Changes the passwords of an SNMPv3 user
(maximum length 32 characters).
This command can only be used for mem-
bers of a group for which this authentication
is necessary.
The encryption password can only be speci-
fied if it is necessary.
Administrator only.