Configuration using Web Based Management and Command Line Interface
4.5 The Switch menu
SCALANCE X-300 / X-400
190 Configuration Manual, 10/2014, C79000-G8976-C187-22
If the VLAN-ID of the port was defined dynamically using the "MAC Authentication" method
or "Guest LAN", the "Port VID" is configured automatically.
This specifies how untagged frames are handled. The following alternatives are possible:
● tagged only
The IE switch discards all untagged frames.
● all
The IE switch forwards all frames.
Here, you can see whether the VID of received frames is evaluated (entry enabled) or not
(entry disabled).
This specifies whether a port was configured as a trunk port (entry enabled) or not (entry
disabled).
Configuration of a port for VLAN
After clicking on one of the entries in the Ports column, you change to the page for
configuring the port properties for receipt of frames:
Figure 4-79 VLAN Port Configuration
This read-only box displays the slot and port number to which the information on this page
relates.
The priority assigned to untagged frames.
The VLAN ID that is assigned to untagged frames.
If the VLAN ID of the port was defined dynamically with the "MAC Authentication" method or
"Guest VLAN", the "Port VLAN ID" is configured automatically.
If you activate this option, untagged frames are discarded. Otherwise, the forwarding rules
apply according to the configuration.