Siemens SIMATIC ET 200SP Function Manual

OPC UA communication
9.3 Using the S7-1500 as an OPC UA server
Communication
220 Function Manual, 11/2019, A5E03735815-AH
6. In the "Import XML file" field, select an XML file that describes an information model.
The "Using OPC UA companion specifications (Page 206)" section describes how to
create such an XML file with the SiOME tool.
The figure below shows a section from the information model:
"IMM_MANUFACTURER_0123456" an instance (use) of the type
"IMM_MES_InterfaceType" which was defined by Euromap 77 . "InjectionUnit_1" is an
instance of the "InjectionUnitType" type of Euromap 77.

Siemens SIMATIC ET 200SP Specifications

General

System Type	Distributed I/O System
Mounting	DIN Rail
Communication Protocol	PROFINET, PROFIBUS
IP Rating	IP20
Category	I/O Systems
Supply Voltage	24 V DC
Modularity	Yes
Hot Swapping	Yes
Storage Temperature	-40°C to +70°C
Digital Inputs	Yes
Digital Outputs	Yes
Analog Inputs	Yes
Analog Outputs	Yes
Communication Interface	PROFINET, PROFIBUS
Number of Modules	Up to 64
Relative Humidity	5 to 95% (non-condensing)
Operating Temperature	-25°C to +60°C