Siemens SIMATIC ET 200SP Function Manual

Communication
Function Manual, 11/2019, A5E03735815-AH
19
Communications services
3
3.1 Overview of communication options
Overview of communications options
The following communications options are available for your automation task.
Table 3- 1 Communications options
Communications options
Functionality
Via interface:
PN/IE
1
DP
serial
PG communication
2
On commissioning, testing, diagnostics
X
X
-
HMI communication
2
On operator control and monitoring
X
X
-
Open communication via TCP/IP
2
Data exchange via PROFINET/Industrial Ethernet
with TCP/IP
Instructions:
• TSEND_C/TRCV_C
• TSEND/TRCV
• TCON
• T_DISCON
X - -
Open communication using ISO-on-
TCP
2
Data exchange via PROFINET/Industrial Ethernet
with ISO-on-TCP
Instructions:
• TSEND_C/TRCV_C
• TSEND/TRCV
• TCON
• T_DISCON
X - -
Open communication via UDP
2
Data exchange via PROFINET/Industrial Ethernet
with UDP
Instructions:
• TSEND_C/TRCV_C
• TUSEND/TURCV
• TCON
• T_DISCON
X - -

Siemens SIMATIC ET 200SP Specifications

General

System Type	Distributed I/O System
Mounting	DIN Rail
Communication Protocol	PROFINET, PROFIBUS
IP Rating	IP20
Category	I/O Systems
Supply Voltage	24 V DC
Modularity	Yes
Hot Swapping	Yes
Storage Temperature	-40°C to +70°C
Digital Inputs	Yes
Digital Outputs	Yes
Analog Inputs	Yes
Analog Outputs	Yes
Communication Interface	PROFINET, PROFIBUS
Number of Modules	Up to 64
Relative Humidity	5 to 95% (non-condensing)
Operating Temperature	-25°C to +60°C