Siemens SIMATIC ET 200SP Function Manual

Communication
Function Manual, 11/2019, A5E03735815-AH
3
Preface
Purpose of the documentation
This function manual provides you with an overview of the communication options, the
CPUs, communication modules and processors and PC systems of the systems SIMATIC
S7-1500, ET 200MP, ET 200SP, ET 200AL, ET 200pro and SIMATIC Drive Controller. This
function manual describes the connection-oriented, asynchronous communication.
The documentation covers the following:
● Overview of the communication services
● Properties of the communication services
● Overview of the user activities for setting up the communication services
Basic knowledge required
The following knowledge is required in order to understand the Function manual:
● General knowledge of automation technology
● Knowledge of the industrial automation system SIMATIC
● Knowledge about how to use STEP 7 (TIA Portal)
Scope of the documentation
This documentation is the basic documentation for all products of the SIMATIC S7-1500,
ET 200MP, ET 200SP, ET 200AL and ET 200pro systems. The product documentation is
based on this documentation.

Siemens SIMATIC ET 200SP Specifications

General

System Type	Distributed I/O System
Mounting	DIN Rail
Communication Protocol	PROFINET, PROFIBUS
IP Rating	IP20
Category	I/O Systems
Supply Voltage	24 V DC
Modularity	Yes
Hot Swapping	Yes
Storage Temperature	-40°C to +70°C
Digital Inputs	Yes
Digital Outputs	Yes
Analog Inputs	Yes
Analog Outputs	Yes
Communication Interface	PROFINET, PROFIBUS
Number of Modules	Up to 64
Relative Humidity	5 to 95% (non-condensing)
Operating Temperature	-25°C to +60°C